Description
Mounting Options
-
ROD HOLDER MOUNT (RHM)
$300.00The rod holder mount is fully adjustable to suit any boat. Great way to mount the barbecue by using existing rod pole holders. The barbecue legs slide onto the Rod Holder Mount and can be adjusted to the correct angle and locked into position.
-
FLUSH DECK MOUNTS (FDM)
$100.00These Flush Deck Mounts are used to mount your barbecue into a large wooden rail or transom (see picture). The front legs of the BARBECUE simply slip over the pin (A) which is placed in the flush deck mount (B) which assembles as (C). Mounts are made from 316 stainless steel.
This enables you to easily remove the barbecue when finished and stow it away.
-
SPACER RAIL MOUNT incl GST
$300.00Stern rail too short to fit your barbecue? Use our new spacer bar which fits directly to your stern rail with a longer and fully adjustable rail to place your rail mounts with Telescopic rod for extra support. Fits in minutes and saves you hundreds of dollars in on-site fabrication. (includes special rail brackets, s/s bar, rail mounts and Telescopic Rod)
-
RAILMOUNT CLAMP (RMO) incl GST (pair)
$120.00These ingeniously designed and manufactured clamps are made from marine grade stainless steel, enabling simple and easy installation and removal – on and off in 5 seconds. The clamp is designed to stay on the rail when not in use.
A – The leg of the barbecue, which is fixed to the barbecue on all smaller models, slides into the rail outboard clamp (B).
B – The rail mount clamp. This bracket is bolted onto your railing system (fits rails 19mm (3/4”) to 32mm (1 1/4”).
C – This is a spring loaded pin which locks your Galleymate to the rail clamp bracket. A is locked into B.
This product has multiple variants. The options may be chosen on the product page -
TELESCOPIC ROD incl GST – GM1100
$75.00The Telescopic Rod is available as an extra support for those who are planning to mount the barbecue as a permanent fixture on the boat. It provides extra stability when required. The rod measures 325mm when closed and can extend to 560mm (not including end fittings).
Optional Accessories
-
COOKING RACK – Galleymate 1100
$55.00The Cooking Rack fits directly over the top of the burners, giving close contact with the heat. By removing the hotplate and inserting the Cooking Rack, the barbecue becomes a stove-top or an oven. A standard size frying pan will fit comfortably on the optional Cooking Rack alongside a small pot or saucepan. By using only the front burner and closing the lid, you can use it as an oven, which will cook your food in around the same time as your home oven. The Cooking Rack sits down low above the burners to allow maximum heat efficiency and economical use of gas.
-
REGULATOR FOR DISPOSABLE GAS BOTTLES incl GST – Galleymate 1100
$45.00This regulator enables you to use the green Coleman small disposable gas bottles (inset image – disposable gas bottle not included). This is a handy option, even as a backup in case your tank runs out. These bottles will cook about 5 barbecues. Safe and saves having a large tank on board.
-
LPG GAS REGULATOR AND HOSE incl GST – Galleymate 1100
$30.00Regulator & Hose
1.2mtr hose with 3/8 SAE fitting
For swap and go type pol gas bottles.
-
LCC27 Regulator & Hose
$40.00New LCC27 Regulator & Hose 1.5mtrs stainless steel hose with 3/8 SAE fitting. It’s compatible with new LPG propane gas bottles for convenience.
-
Brass 90 Degree Elbow
$20.00Hose Adaptor elbow 3/8 SAE Male x 3/8 SAE female.
-
Quick Connect Brass Fitting
$40.00Get connected with the Quick Connect Brass Fitting. This brass fitting is easy to snap on and off without fuss. It’s spring-loaded.
3/8SAE brass fittings
-
BAYONET HOSE – Galleymate 1100
$50.00 – $65.001.5 metre
AUD $50 incl GST2 metre
AUD $60 incl GST3 metre
AUD $65 incl GST
Hose for use when your van or RV is equipped with an integrated gas system and has the female bayonet fitting available.
Stainless Steel braided hose with bayonet connection (3/8 SAE gas Fitting)
This product has multiple variants. The options may be chosen on the product page -
Stainless Steel Hose with Bayonet & Handle
$75.00Bayonet & Stainless Steel Braided hose 1.5mtr with Handle
with 3/8SAE fitting
-
BAKING DISH incl GST
$55.00Made of a heavy marine grade 1mm thick stainless steel designed to fit right across the back of the barbecue. Giving more room for your meat and vegetables.
Height: 75 mm Width: 370mm Depth: 170mm. 1mm thick. -
UTENSIL TRAY incl GST – Galleymate 1100
$60.00The Barbecue Utensil Tray clips onto the front of your barbecue as shown. It is ideal for storing your utensils or condiments while cooking and prevents any excess spatter. Made from marine grade stainless steel.
-
SPITROAST – Galleymate 1100
$140.00The Spitroast Assembly is a great addition to your barbecue as it enables you to cook a roast for a crowd while you enjoy yourself. During cooking, the meat is constantly rotating, so the flavour and tenderness is enhanced giving you the perfect roast. Operates 2 D-cell batteries.
-
GALLEYMATE 1100 COVER
$120.00Salt water resistant cover.
Colour: Captains Navy Blue.
Stainless Steel Hotplates
All our barbecues come with a choice of cooking surfaces. For the gourmet cook we have Stainless Steel half or full grill hotplates which are ideal for those who want to cook over a flame grill. These hot plates require the attachment of flame dispersers fitted to the standard burners.
-
Hotplates – Sizzler low & high lid and Galleymate 1100
$150.00 – $375.00A – Full Hotplate
AUD $150 incl GSTB – Half Grill/Half Hotplate* (includes Plate & 2 x Gas Burners with ½ flame dispersers)
AUD $335 incl GSTC – Full Grill* (includes 2 x Plate & Gas Burners with Full flame dispersers)
AUD $375 incl GST*When using Grill Hotplates the burners must be fitted with flame dispersers to avoid “flareup”.
This product has multiple variants. The options may be chosen on the product page
